MOD.3186 Inertia wheel 0,1/0,3kW	For simulating heavy starting and energy storage. Design: built into a machine housing with base plate. Flywheel mass: approx 9kg Coupling type: cog coupling Unit type: table-top unit Dimensions: LxWxH: 33x18x19 cm; Weight: 12 kg

MOD.3174 Magnetic powder brake 3Nm

Magnetic powder brake as a mechanical load for torque and rpm detection of electric motors. A slight excitation power is required and the full braking torque is available even at standstill. Torque recording is made using wire strain gauges and speed optoelectronically. Linked to the machine via a free shaft and with cog coupling sleeve and anti-vibration base plate. External cooling. Maximum torque: 5Nm Coupling type: cog coupling Unit type: table-top unit Dimensions: LxWxH: 27x18x20 cm; Weight: 7,0 kg

	MOD.3170 Shunt Excitation d.c. Generator 300W (Braking Generator) Nominal voltage: 220V d.c.; Excitation voltage: 220V d.c. Power 300W at 3000 rpm Complete with arms, weights, counterweights. Coupling type: cog coupling Unit type: table-top unit Dimensions: LxWxH:35x18x20 cm; Weight: 6,0 kg

	MOD-3180 Electromagnetic Brake Brake as a mechanical load for machines in the 0,4kW range. It is used for direct test on motors up to 300W Continuous rated braking: 300W at 3000rpm; Discontinuous rated braking: 500W at 3000rpm. The brake is complete with arms, weights, and counterweights. Dimensions: LxWxH:35x18x20 cm; Weight: 8,0 kg (Picture subject to changement for new model 2007)

	MOD-3180C Torque Meter  With Load Cell This accessory, applied to brake MOD.3180 or MOD 3170, allows to measure the motor torque during the test and to read the value on the digital instrument, calibrates in kgm. or Nm. A proportional output is provided for torque reading also useful for data transmission and acquisition. Dimensions: LxWxH:25x25x15 cm; Weight: 6,0 kg

MOD.3181 Electrodynamometer Module

This module allows a variable mechanical load for measure the torque on all machines of our system. Electrodynamometer is mechanically couplable to all machines. It is used for direct test on motors up to 0,4kW Electrodynamometer can be connected with our MOD-3180C so that torque is readable on a digital indicator which shows values directly in 0-3Nm range. The electrodynamometer  is complete with arms, weights, and counterweights. Dimensions: LxWxH:35x18x20 cm; Weight: 8kg.

MOD.3181-C
Electrodynamometer Module System
This system which includes both MOD.3181 AND MOD.3180-c allows a variable mechanical load for direct torque test on all machines of our system.
Thanks  load cell system MOD-3180C hat torque is readable on a digital indicator which shows values directly in kgm or Nm.
The system is mechanically couplable to all machines.
Dimensions: LxWxH:25x25x15 cm;
Weight: 6,0 kg